Bulk Milk Cooler

Bulk Milk Cooler

SS Engineers & Consultants manufacturers cooling tanks made of high-quality stainless steel, the sizes includes from 500 to 5000 liters cooling capacities.

The basic understanding of milk cooling systems can help farmers make informed about their milk cooling compositions. The milk must be cooled at 18°C at the completion of the first milking in the milk cooling tank, and should not exceed 13°C at the completion of subsequent milking’s; The cooled Milk then to be maintained below 7°C till it is collected.

Raw milk grows bacteria rapidly above 7°C, therefore it is important to cool milk at farm’s to maintain milk quality. SS Engineers Milk Cooling Tanks are the best solution for cooling milk at the farms.

  • Environmentally friendly tank insulation from “green” polyurethane foam, CFC-free.
  • Higher cooling performance with S.T.I. evaporator.
  • Agitator stops automatically if the lid is opened.
  • Generously sized lid opening provides optimum access to the tank optimum cleaning and from inside.
  • Runs with electronic control A4.
  • Rated for Low energy consumption.

CAPACITY
MODEL
TYPE
BMC TANK DIMENSION
CONDENSING UNIT
Length
Width
Height
Length
Width
Height
0.5 KL
SSEC/C05K
Cylinderical
1120 mm Dia
1300 mm
653 mm
667 mm
470 mm
1 KL
SSEC/HSC1K
Open Horizontal- Semi Cylinderical
1875 mm
1220 mm
750 mm
935 mm
793 mm
685 mm
2 KL
SSEC/HSC2K2
Open Horizontal- Semi Cylinderical
2400 mm
1460 mm
865 mm
935 mm
793 mm
685 mm
3 KL
SSEC/HSC3K
Open Horizontal- Semi Cylinderical
2620 mm
1870 mm
1300 mm
1200 mm
790 mm
690 mm
3 KL - Closed
SSEC/HSCC3K
Closed Horizontal- Cylinderical
3100 mm
1700 mm
1400 mm
1200 mm
790 mm
690 mm
5 KL
SSEC/HSC5K
Open Horizontal-Semi Cylinderical
3120 mm
1870 mm
1570 mm
1200 mm
790 mm
690 mm
5 KL - Closed
SSEC/HSCC5K
Closed Horizontal- Cylinderical
3900 mm
2000 mm
1600 mm
1348 mm
785 mm
742 mm